diff --git a/Dockerfile b/Dockerfile
new file mode 100644
index 0000000..8fe0b1e
--- /dev/null
+++ b/Dockerfile
@@ -0,0 +1,23 @@
+# Use Debian Slim as base image
+FROM debian:stable-slim
+
+# Install necessary dependencies
+RUN apt-get update && apt-get install -y \
+    sudo \
+    curl \
+    && rm -rf /var/lib/apt/lists/*
+
+# Set working directory
+WORKDIR /script
+
+# Copy the initialization script
+COPY init-linux-harden.sh /script/
+
+# Make the script executable
+RUN chmod +x /script/init-linux-harden.sh
+
+# Set entrypoint to run the script
+ENTRYPOINT ["/bin/sh", "-c"]
+
+# Default command to run the script
+CMD ["/script/init-linux-harden.sh"]
diff --git a/README.md b/README.md
index 5c72413..bd6e9b5 100644
--- a/README.md
+++ b/README.md
@@ -1,12 +1,14 @@
 # Linux Server Hardener
+
 Bash script that automates server security hardening on a new Linux server.
 
-I wanted to change my VPS(Virtual Private Server) provider and was testing out many providers and many Linux flavours on those VPSes. But before doing anything those servers needed to be given basic amount security and this involved a set of repetitive commands on terminal. Depending on network speed and number of mis-types, these took between 30-90 minutes to perform. 
+I wanted to change my VPS(Virtual Private Server) provider and was testing out many providers and many Linux flavours on those VPSes. But before doing anything those servers needed to be given basic amount security and this involved a set of repetitive commands on terminal. Depending on network speed and number of mis-types, these took between 30-90 minutes to perform.
 
 This script is meant to save that time.
 
-## *** __WARNING__ ***
-This script can potentially make your server inaccessible. 
+## **_ **WARNING** _**
+
+This script can potentially make your server inaccessible.
 
 At the very least, read the [FAQ section](https://github.com/pratiktri/init-li-harden#faq) before executing.
 
@@ -20,20 +22,20 @@ Stable. Production ready.
 
 ### Prerequisites
 
-* One of the following Linux flavours
-  - Debian 8.x
-  - Debian 9.x
-  - Debian 10.x
-  - Ubuntu 14.x
-  - Ubuntu 16.x
-  - Ubuntu 18.x
-  - Ubuntu 20.x
-* *wget* should be installed (comes preinstalled on the above OSes anyways)
-* *root* access to the server
+-   One of the following Linux flavours
+    -   Debian 8.x
+    -   Debian 9.x
+    -   Debian 10.x
+    -   Ubuntu 14.x
+    -   Ubuntu 16.x
+    -   Ubuntu 18.x
+    -   Ubuntu 20.x
+-   _wget_ should be installed (comes preinstalled on the above OSes anyways)
+-   _root_ access to the server
 
 ### Examples
 
-The script is intended to be executed immediately after you have access to a *__new__* Linux server (most likely a VPS) as *__root__*.
+The script is intended to be executed immediately after you have access to a _**new**_ Linux server (most likely a VPS) as _**root**_.
 
 ```console
 root@host:~# wget -q https://sot.li/hardensh -O init-linux-harden.sh && bash ./init-linux-harden.sh -d -q -hide
@@ -41,7 +43,7 @@ root@host:~# wget -q https://sot.li/hardensh -O init-linux-harden.sh && bash ./i
 root@host:~# wget -q https://sot.li/hardensh -O init-linux-harden.sh && bash ./init-linux-harden.sh --defaultsourcelist --quiet --hide-credentials
 ```
 
-> There are inherent risks involved with running scripts directly (without reviewing it first) from web - as done above. Everyone does it anyways, but you have been warned. 
+> There are inherent risks involved with running scripts directly (without reviewing it first) from web - as done above. Everyone does it anyways, but you have been warned.
 
 ### Available Options
 
@@ -61,64 +63,71 @@ Usage: sudo bash $0 [-u|--username username] [-r|--resetrootpwd] [--defaultsourc
 
 Example: bash ./linux_init_harden.sh --username myuseraccount --resetrootpwd
 
-Below restrictions apply to usernames - 
+Below restrictions apply to usernames -
    - [a-zA-Z0-9] [-] [_] are allowed
    - NO special characters.
    - NO spaces.
 ```
 
 ## What does it do ?
+
 Script performs the following operations:-
 
 1. [Create non-root user and give it "sudo" privilege](https://github.com/pratiktri/init-li-harden#1-create-non-root-user-and-give-it-sudo-privilege "Goto details of the step")
-2. [Generate passphrage protected *ed25519* SSH Keys](https://github.com/pratiktri/init-li-harden#2-generate-passphrage-protected-ed25519-ssh-keys-private--public "Goto details of the step")
+2. [Generate passphrage protected _ed25519_ SSH Keys](https://github.com/pratiktri/init-li-harden#2-generate-passphrage-protected-ed25519-ssh-keys-private--public "Goto details of the step")
 3. [Secure "authorized_keys" file](https://github.com/pratiktri/init-li-harden#3-secure-authorized_keys-file "Goto details of the step")
 4. [[Optionally] Reset the url for apt repo from VPS provided CDN to OS provided ones](https://github.com/pratiktri/init-li-harden#4-optionally-reset-the-url--for-apt-repo-from-vps-provided-cdn-to-os-provided-ones "Goto details of the step")
 5. [Update + Upgrade + Install softwares (sudo curl screen ufw fail2ban)](https://github.com/pratiktri/init-li-harden#5-updates--upgrades--installs-required-softwares-sudo--screen-ufw-fail2ban "Goto details of the step")
 6. [Configure UFW](https://github.com/pratiktri/init-li-harden#6-configure-ufw "Goto details of the step")
 7. [Configure Fail2Ban](https://github.com/pratiktri/init-li-harden#7-configure-fail2ban "Goto details of the step")
 8. [Schedule cron for daily system update](https://github.com/pratiktri/init-li-harden#8-schedule-cron-for-daily-system-update "Goto details of the step")
-9.  [[Optionally] Reset *root* password](https://github.com/pratiktri/init-li-harden#9-optionally-reset-root-password "Goto details of the step")
+9. [[Optionally] Reset _root_ password](https://github.com/pratiktri/init-li-harden#9-optionally-reset-root-password "Goto details of the step")
 10. [Alter SSH options(/etc/ssh/sshd_config) to do the following:-](https://github.com/pratiktri/init-li-harden#10-alter-ssh-options "Goto details of the step")
-   * Disable SSH login for *root* (PermitRootLogin no)
-   * Disable SSH login through password for all users (PasswordAuthentication no) 
-   * Updates path for *authoried_keys* file
+
+-   Disable SSH login for _root_ (PermitRootLogin no)
+-   Disable SSH login through password for all users (PasswordAuthentication no)
+-   Updates path for _authoried_keys_ file
+
 11. [On successfully completing above operations, display the following on screen:-](https://github.com/pratiktri/init-li-harden#11-display-summary "Goto details of the step")
-    * Username
-    * User Password
-    * SSH Private Key's path on the server
-    * SSH Public Key's path on the server
-    * SSH Private Key's passphrase
-    * (If so opted) New *root* password
-    * SSH Private Key
-    * SSH Public Key
+    -   Username
+    -   User Password
+    -   SSH Private Key's path on the server
+    -   SSH Public Key's path on the server
+    -   SSH Private Key's passphrase
+    -   (If so opted) New _root_ password
+    -   SSH Private Key
+    -   SSH Public Key
 
-
-Step 2 & Step 5 are most time consuming operations. 
+Step 2 & Step 5 are most time consuming operations.
 
 If you are stuck on Step 5 for more than 10 minutes, something went wrong in Step 4. Stop (ctrl + c) the script and check log file to see what went wrong.
 
-Step 8 is the most dangerous operation. 
+Step 8 is the most dangerous operation.
 
 ## Error Handling
+
 Since the script has the potential to make you loose access to your server, it takes a number of steps to recover from an error.
 
 ### Back up files
-Script creates a back of every file that it changes. 
 
-Back up files are stored in the same directory as the original file. 
+Script creates a back of every file that it changes.
 
-Back up file name = (Original File Name) + "." + (Script start timestamp in '%d_%m_%Y-%H_%M_%S' format) + "_bak"
+Back up files are stored in the same directory as the original file.
 
-So, if the original file name was *sshd_config* and the script was started at 25th January 2019 09:15:25, then the backup files name would be *sshd_config.25_01_2019-09_15_25_bak*
+Back up file name = (Original File Name) + "." + (Script start timestamp in '%d*%m*%Y-%H*%M*%S' format) + "\_bak"
+
+So, if the original file name was _sshd_config_ and the script was started at 25th January 2019 09:15:25, then the backup files name would be _sshd_config.25_01_2019-09_15_25_bak_
 
 ### Recovery
-Script *tries* to recover from an error if it can determine that an error has occured. What it does to recover depends on which step the error has occured.
+
+Script _tries_ to recover from an error if it can determine that an error has occured. What it does to recover depends on which step the error has occured.
 
 **Step 9 (Alter /etc/ssh/sshd_config) is where most danger resides. If this step fails & script can not successfully recovery - then you'll most likely loose all access to your system**.
 
 ## Screenshots
+
 ### Operation successful and credentials displayed on screen
+
 ![Success With Credentials on Screen - the command](/screencaptures/success1.jpg?raw=true "Command")
 
 ![Success With Credentials on Screen - Prompt to procceed](/screencaptures/success2.jpg?raw=true "Prompt to Procceed")
@@ -130,92 +139,94 @@ Script *tries* to recover from an error if it can determine that an error has oc
 ![Success With Credentials on Screen - Execution Succeeded 2](/screencaptures/success5.jpg?raw=true "Execution Succeeded 2")
 
 ### Operation successful and credentials hidden from screen
+
 ![Success With Credentials Hidden - Execution Succeeded 3](/screencaptures/success6.jpg?raw=true "Execution Succeeded 3")
 
 ### Operation failed and reverted
+
 ![Failure and revert](/screencaptures/failure.jpg?raw=true "Failed and Reverted")
 
 ## Details of each operation
+
 ### 1. Create non-root user and give it "sudo" privilege
+
 You can specify your own username with "--username" or "-u" flag.
 
 If the username provided already exists, then the script will terminate without doing any operation.
 
-When accepting username through "--username", __*script actively rejects special characters in the name*__ because bash does not act well with special characters. The values accepted by the script [a-zA-Z0-9_-] i.e., alphanumeric and [_] and [-]
+When accepting username through "--username", **_script actively rejects special characters in the name_** because bash does not act well with special characters. The values accepted by the script [a-zA-Z0-9_-] i.e., alphanumeric and [_] and [-]
 
-If "--username" is not provided, __*script will randomly generate an username for you*__. Script generated usernames are 9 character long and are alphanumeric (i.e., numbers & English characters).
+If "--username" is not provided, **_script will randomly generate an username for you_**. Script generated usernames are 9 character long and are alphanumeric (i.e., numbers & English characters).
 
-Password for the user is __always__ randomly generated. Passwords are 15 character long and are alphanumeric as well.
+Password for the user is **always** randomly generated. Passwords are 15 character long and are alphanumeric as well.
 
 #### Error Handling
 
-> __Failure Impact__ - Minimal. An additional user on system. 
+> **Failure Impact** - Minimal. An additional user on system.
 >
-> __Restoration__ - Script tries to delete the user along with user's home directory
+> **Restoration** - Script tries to delete the user along with user's home directory
 >
-> __Impact of Restoration Failure__ - If the user will linger around in the system. You might have to manually delete the user and its home directory. 
+> **Impact of Restoration Failure** - If the user will linger around in the system. You might have to manually delete the user and its home directory.
 >
-> __After Error__ - Script will be terminated.
+> **After Error** - Script will be terminated.
 
+### 2. Generate passphrage protected _ed25519_ SSH Keys (Private & Public)
 
-
-### 2. Generate passphrage protected *ed25519* SSH Keys (Private & Public)
-Since password authentications are bad security practice, script will generate a SSH Key and use that for user authentication. 
+Since password authentications are bad security practice, script will generate a SSH Key and use that for user authentication.
 
 You need the following 3 to be able to access the server after the script is done:-
-* Public Key
-* Private Key
-* Passphrase for the Key
 
- These 3 will be diplayed on screen at the end of the script. Copy them and __keep them safe. Without these you won't be able to access the server.__
+-   Public Key
+-   Private Key
+-   Passphrase for the Key
+
+These 3 will be diplayed on screen at the end of the script. Copy them and **keep them safe. Without these you won't be able to access the server.**
 
 We use OpenSSH keyformat and ed25519 algorithm to generate ours. You can read the reason for that [here](https://security.stackexchange.com/a/144044) and [here](https://stribika.github.io/2015/01/04/secure-secure-shell.html). For additional security the key is secured by a passphrase. This passphrase is randomly generated. Passphrase are 15 character long and are alphanumeric. Algorithm used for user's password and SSH Private Key's passphrase are the same.
 
-Generated keys are placed in ".ssh" sub-directory of the user's (created in step 1 above) home-directory, i.e., /home/*__[username]__*/.ssh/
+Generated keys are placed in ".ssh" sub-directory of the user's (created in step 1 above) home-directory, i.e., /home/_**[username]**_/.ssh/
 
-SSH Public Key is then *appended* to /home/*__[username]__*/.ssh/authorized_keys file.
+SSH Public Key is then _appended_ to /home/_**[username]**_/.ssh/authorized_keys file.
 
 #### Error Handling
 
-> __Failure Impact__ - Minimal. An additional user on system. 
-> 
-> __Restoration__ - Script tries to delete the user along with user's home directory.
-> 
-> __Impact of Restoration Failure__ - If restoration of step 2 failed - most probably restoration on step 1 failed as well. At any case - just delete the user's home directory to rid your system of garbage files.
-> 
-> __After Error__ - Script will be terminated.
-
-
+> **Failure Impact** - Minimal. An additional user on system.
+>
+> **Restoration** - Script tries to delete the user along with user's home directory.
+>
+> **Impact of Restoration Failure** - If restoration of step 2 failed - most probably restoration on step 1 failed as well. At any case - just delete the user's home directory to rid your system of garbage files.
+>
+> **After Error** - Script will be terminated.
 
 ### 3. Secure "authorized_keys" file
-"authorized_keys" file present in user's .ssh sub-directory contains the Public Key values. These Public Key values are used to authenticate user logins. Since, this is an important file we need to secure it tight. 
+
+"authorized_keys" file present in user's .ssh sub-directory contains the Public Key values. These Public Key values are used to authenticate user logins. Since, this is an important file we need to secure it tight.
 
 Following are the file access restrictions that the script applies:-
-* Make *root* user the owner of /home/*__[username]__*/.ssh/ directory and all files inside it.
-* Give *root* group access to /home/*__[username]__*/.ssh/ directory and all files inside it.
-* Make the /home/*__[username]__*/.ssh/ directory and all files inside it visible only to the *root* user.
-* Remove the editing rights on /home/*__[username]__*/.ssh/authorized_keys file from every user - including *root*.
-* Make the /home/*__[username]__*/.ssh/authorized_keys file immutable.
+
+-   Make _root_ user the owner of /home/_**[username]**_/.ssh/ directory and all files inside it.
+-   Give _root_ group access to /home/_**[username]**_/.ssh/ directory and all files inside it.
+-   Make the /home/_**[username]**_/.ssh/ directory and all files inside it visible only to the _root_ user.
+-   Remove the editing rights on /home/_**[username]**_/.ssh/authorized_keys file from every user - including _root_.
+-   Make the /home/_**[username]**_/.ssh/authorized_keys file immutable.
 
 #### Error Handling
 
-> __Failure Impact__ - Minimal. An additional user on system. 
-> 
-> __Restoration__ - Reset the attributes of "authorized_keys" file. Then deletes the user and its home directory.
-> 
-> __Impact of Restoration Failure__ - User and its home directory would persist. Delete them manually. Some of the files have their attributes modified to make them immutable (i.e. *chattr +i* ), so while deleting user's home directory manually, remember to remove this attribute (i.e. "*chattr -i* ).
-> 
-> __After Error__ - Script will be terminated.
+> **Failure Impact** - Minimal. An additional user on system.
+>
+> **Restoration** - Reset the attributes of "authorized_keys" file. Then deletes the user and its home directory.
+>
+> **Impact of Restoration Failure** - User and its home directory would persist. Delete them manually. Some of the files have their attributes modified to make them immutable (i.e. _chattr +i_ ), so while deleting user's home directory manually, remember to remove this attribute (i.e. "_chattr -i_ ).
+>
+> **After Error** - Script will be terminated.
 
+### 4. [Optionally] Reset the url for apt repo from VPS provided CDN to OS provided ones
 
-
-### 4. [Optionally] Reset the url  for apt repo from VPS provided CDN to OS provided ones
-
-Most VPS provider change the location from which operating system downloads software from (i.e. *apt* repository); usually to CDNs that are maintained by them. While, this greatly improves time taken to install applications, it does come with its security implications (what if they insert tracker/sniffer in application?). 
+Most VPS provider change the location from which operating system downloads software from (i.e. _apt_ repository); usually to CDNs that are maintained by them. While, this greatly improves time taken to install applications, it does come with its security implications (what if they insert tracker/sniffer in application?).
 
 However, one can also argue that if the OS (i.e. Linux) is installed by the providers, then OS itself is a more likely place where they might want to insert something dirty.
 
-Depending on which argument you find valid, __you can use this option in the script to ensure the default OS-provided CDNs are used__. This is done by updating the [/etc/apt/sources.list](https://linoxide.com/debian/configure-sources-list-debian-9/) file.
+Depending on which argument you find valid, **you can use this option in the script to ensure the default OS-provided CDNs are used**. This is done by updating the [/etc/apt/sources.list](https://linoxide.com/debian/configure-sources-list-debian-9/) file.
 
 If the script is started with --defaultsourcelist option, then for Debian http://deb.debian.org/debian is used and for Ubuntu http://archive.ubuntu.com/ubuntu/ is used.
 
@@ -223,131 +234,131 @@ This is disabled by default.
 
 #### Error Handling
 
-> __Failure Impact__ - In the worst case, you will not be able to update or install applications through *apt*. In the best case, Service providers CDN will continue to be used for *apt* to install & update applications. Script will continue to next step after restoration
-> 
-> __Restoration__ - Before execution, a back up of sources.list file was made. During restoration, this back up file is copied (over-written) over to sources.list file.
-> 
-> __Impact of Restoration Failure__ - You may not be able to install or update the system. Manually check if any *_bkp file exists in /etc/apt/ directory. If multiple file exist - use the most recent file and rename it to /etc/apt/sources.list
-> 
-> __After Error__ - Script continues to next step after restoration.
+> **Failure Impact** - In the worst case, you will not be able to update or install applications through _apt_. In the best case, Service providers CDN will continue to be used for _apt_ to install & update applications. Script will continue to next step after restoration
+>
+> **Restoration** - Before execution, a back up of sources.list file was made. During restoration, this back up file is copied (over-written) over to sources.list file.
+>
+> **Impact of Restoration Failure** - You may not be able to install or update the system. Manually check if any \*\_bkp file exists in /etc/apt/ directory. If multiple file exist - use the most recent file and rename it to /etc/apt/sources.list
+>
+> **After Error** - Script continues to next step after restoration.
 
+### 5. Updates + Upgrades + Installs required softwares (sudo screen ufw fail2ban)
 
-
-### 5. Updates + Upgrades + Installs required softwares (sudo  screen ufw fail2ban)
-Pretty self-explanatory. 
+Pretty self-explanatory.
 
 #### Error Handling
 
-> __Failure Impact__ - Both UFW and Fail2ban CANNOT be configured. So, major part of server hardening will not be successful.
-> 
-> __Restoration__ - Nothing to restore. However, do check the log file to see that went wrong. 
-> 
-> __Impact of Restoration Failure__ - None.
-> 
-> __After Error__ - Script continues to next step.
+> **Failure Impact** - Both UFW and Fail2ban CANNOT be configured. So, major part of server hardening will not be successful.
+>
+> **Restoration** - Nothing to restore. However, do check the log file to see that went wrong.
+>
+> **Impact of Restoration Failure** - None.
+>
+> **After Error** - Script continues to next step.
 
 NOTE - As it is evident from above script does not uninstalled already installed programs even when error occors in this step or any other steps. Cause, you might have installed those programs before running the script or those programs might have been preloaded by the OS itself - too many variables to consider.
 
-
-
 ### 6. Configure UFW
+
 [UFW(**U**ncomplicated **F**ire**W**all)](https://www.digitalocean.com/community/tutorials/how-to-setup-a-firewall-with-ufw-on-an-ubuntu-and-debian-cloud-server) makes it easy to manage what kind of internet traffic enters or leaves the server. Without this program you would have to deal with Linux's iptables (which I can not understand at all).
 
-This script sets up UFW so that only __ssh__(required for user login), __http__(required for any web application) & __https__(also required for any web application) __traffic are allowed in and out__ of the server. All other traffic are blocked.
+This script sets up UFW so that only **ssh**(required for user login), **http**(required for any web application) & **https**(also required for any web application) **traffic are allowed in and out** of the server. All other traffic are blocked.
 
 #### Error Handling
 
-> __Failure Impact__ - Less secure server.
-> 
-> __Restoration__ - Disable UFW
-> 
-> __Impact of Restoration Failure__ - Most probably UFW was not installed properly. Check log file for details. 
-> 
-> __After Error__ - Continue to next step after restoration.
-
-
+> **Failure Impact** - Less secure server.
+>
+> **Restoration** - Disable UFW
+>
+> **Impact of Restoration Failure** - Most probably UFW was not installed properly. Check log file for details.
+>
+> **After Error** - Continue to next step after restoration.
 
 ### 7. Configure Fail2Ban
+
 While UFW restricts access to ports, the ports that are required (and are allowed by UFW in above step) for our purpose can be exploited by nefarious actors.
 
-Fail2ban watches traffic coming through the allowed ports to determine if it is indeed a legitimate one. This determination is usually done by analyzing various *log files* being generated by Linux and other applications running on the server. If anything suspicious is found then after a certain number of illegitimate attempts the intruder(IP) is banned. Ban is then lifted after a desired amount of time.
+Fail2ban watches traffic coming through the allowed ports to determine if it is indeed a legitimate one. This determination is usually done by analyzing various _log files_ being generated by Linux and other applications running on the server. If anything suspicious is found then after a certain number of illegitimate attempts the intruder(IP) is banned. Ban is then lifted after a desired amount of time.
 
 This script sets up Fail2ban as following:-
-* default ban time is 5 hours, 
-* Whitelists your server's IP from detection (uses https://ipinfo.io/ip to determine the IP),
-* sets (backend = polling). *polling* is an algoritm used to check if the *log files* are updated. This algorithm does not require any additional software and is faster option to choose for our configuration.
-* Explicitly enables protection for *ssh* with (maxretry = 3) & (bantime = 2592000)
+
+-   default ban time is 5 hours,
+-   Whitelists your server's IP from detection (uses https://ipinfo.io/ip to determine the IP),
+-   sets (backend = polling). _polling_ is an algoritm used to check if the _log files_ are updated. This algorithm does not require any additional software and is faster option to choose for our configuration.
+-   Explicitly enables protection for _ssh_ with (maxretry = 3) & (bantime = 2592000)
 
 #### Error Handling
 
-> __Failure Impact__ - Less secure server.
-> 
-> __Restoration__ - If back up of /etc/fail2ban/jail.local file found, then that is restored; else back up of /etc/fail2ban/jail.conf is restored. Also, back up of /etc/fail2ban/jail.d/defaults-debian.conf file restored if available.
-> 
-> __Impact of Restoration Failure__ - Potential corruption of Fail2ban configuration. Check log file for details.
-> 
-> __After Error__ - Continue to next step after restoration.
-
-
+> **Failure Impact** - Less secure server.
+>
+> **Restoration** - If back up of /etc/fail2ban/jail.local file found, then that is restored; else back up of /etc/fail2ban/jail.conf is restored. Also, back up of /etc/fail2ban/jail.d/defaults-debian.conf file restored if available.
+>
+> **Impact of Restoration Failure** - Potential corruption of Fail2ban configuration. Check log file for details.
+>
+> **After Error** - Continue to next step after restoration.
 
 ### 8. Schedule cron for daily system update
-While it is a bad idea to schedule automatic installation of updates ([read more here](https://debian-administration.org/article/162/A_short_introduction_to_cron-apt)), sizable amount of server administration time can be saved by *downloading* updates when no one is looking.
+
+While it is a bad idea to schedule automatic installation of updates ([read more here](https://debian-administration.org/article/162/A_short_introduction_to_cron-apt)), sizable amount of server administration time can be saved by _downloading_ updates when no one is looking.
 
 In this step we schedule a daily crontab (/etc/cron.daily/linux_init_harden_apt_update.sh) to download updates. You would want to manually do the installation running the below command.
 
 ```console
 user@host:~$ sudo apt-get dist-upgrade
 ```
+
 #### Error Handling
 
-> __Failure Impact__ - Minimal. No auto download of software updates
-> 
-> __Restoration__ - Remove the script file (/etc/cron.daily/linux_init_harden_apt_update.sh).
-> 
-> __Impact of Restoration Failure__ - The cron job might execute once a day and *fail*. You might have to delete the file (/etc/cron.daily/linux_init_harden_apt_update.sh) manually.
-> 
-> __After Error__ - Continue to next step.
+> **Failure Impact** - Minimal. No auto download of software updates
+>
+> **Restoration** - Remove the script file (/etc/cron.daily/linux_init_harden_apt_update.sh).
+>
+> **Impact of Restoration Failure** - The cron job might execute once a day and _fail_. You might have to delete the file (/etc/cron.daily/linux_init_harden_apt_update.sh) manually.
+>
+> **After Error** - Continue to next step.
 
 ### 9. [Optionally] Reset root password
-Since, VPS providers sends you the password of your VPS's *root* user in email in plain text. So, password needs to be changed immediately. **But, since we will disable *root* login AND password login in the next step, changing *root* password might be an overkill**. But, still...
+
+Since, VPS providers sends you the password of your VPS's _root_ user in email in plain text. So, password needs to be changed immediately. **But, since we will disable _root_ login AND password login in the next step, changing _root_ password might be an overkill**. But, still...
 
 Also most VPS providers these days allow you to provide SSH Public Key in their website. If you have done that you can skip this step. **It is disabled by default anyways**.
 
-To change your *root* password provide option *-r* or *--resetrootpw*. *root* password will be randomly generated. Passwords are 15 character long and are alphanumeric.
+To change your _root_ password provide option _-r_ or _--resetrootpw_. _root_ password will be randomly generated. Passwords are 15 character long and are alphanumeric.
 
 #### Error Handling
 
-> __Failure Impact__ - None. Continue using existing password.
-> 
-> __Restoration__ - Nothing to restore.
-> 
-> __Impact of Restoration Failure__ - None.
-> 
-> __After Error__ - Continue to next step.
+> **Failure Impact** - None. Continue using existing password.
+>
+> **Restoration** - Nothing to restore.
+>
+> **Impact of Restoration Failure** - None.
+>
+> **After Error** - Continue to next step.
 
-
-  
 ### 10. Alter SSH options
-This step contines from step 3 to harden our ssh login. Here, we edit */etc/ssh/sshd_config* file to achieve the following:-
-* Disable *root* login (**PermitRootLogin no**). No one needs to work on *root*. The new user created already has *root* privileges anyways.
-* Disable password login (**PasswordAuthentication no**). This ensures we can ONLY login though SSH Keys.
-* Specify where to find authorized public keys which are granted login (\\.ssh\authorized_keys %h\\.ssh\authorized_keys)
+
+This step contines from step 3 to harden our ssh login. Here, we edit _/etc/ssh/sshd_config_ file to achieve the following:-
+
+-   Disable _root_ login (**PermitRootLogin no**). No one needs to work on _root_. The new user created already has _root_ privileges anyways.
+-   Disable password login (**PasswordAuthentication no**). This ensures we can ONLY login though SSH Keys.
+-   Specify where to find authorized public keys which are granted login (\\.ssh\authorized_keys %h\\.ssh\authorized_keys)
 
 #### Error Handling
 
-> __Failure Impact__ - Potentially __CATASTROPHIC__.
-> 
-> __Restoration__ - Delete user and its home directory; Disable UFW: If back up of /etc/fail2ban/jail.local file found, then that is restored; else back up of /etc/fail2ban/jail.conf is restored. Also, back up of /etc/fail2ban/jail.d/defaults-debian.conf file restored if available. Restore the /etc/ssh/sshd_config file from backup file created before the operation.
-> 
-> __Impact of Restoration Failure__ - Fatal. DO NOT logout of the session. If you do then, you may not be able to log back in. Check the log file to see what went wrong. Issue the following command and see what is the out put. Search the error message on internet for solution.
+> **Failure Impact** - Potentially **CATASTROPHIC**.
+>
+> **Restoration** - Delete user and its home directory; Disable UFW: If back up of /etc/fail2ban/jail.local file found, then that is restored; else back up of /etc/fail2ban/jail.conf is restored. Also, back up of /etc/fail2ban/jail.d/defaults-debian.conf file restored if available. Restore the /etc/ssh/sshd_config file from backup file created before the operation.
+>
+> **Impact of Restoration Failure** - Fatal. DO NOT logout of the session. If you do then, you may not be able to log back in. Check the log file to see what went wrong. Issue the following command and see what is the out put. Search the error message on internet for solution.
+>
 > ```console
 > root@host:~# service sshd restart
 > ```
-> __After Error__ - Script will be terminated.
-
-
+>
+> **After Error** - Script will be terminated.
 
 ### 11. Display Summary
+
 All the generated username, passwords, SSH Key location & SSH Keys themselves are displayed on the screen.
 
 This might not be desired (nosy neighbours), on future versions you might find option to NOT show the details on screen and find them from the log file.
@@ -356,39 +367,79 @@ NOTE - while we login through SSH Keys, you will still be asked for your passwor
 
 The logfile is located in /tmp/ directory - thus will be removed when server reboots. All the details shown on the screen and a lot more can be found in the log. Exact logfile location will be shown on the screen as well.
 
+## Docker Testing
+
+### Prerequisites
+
+-   Docker installed on your system
+-   Docker CLI configured
+
+### Building the Docker Image
+
+```bash
+docker build -t linux-harden .
+```
+
+### Running the Docker Container
+
+```bash
+# Run with default options
+docker run --rm -it linux-harden
+
+# Run with specific username
+docker run --rm -it linux-harden "/script/init-linux-harden.sh -u testuser"
+```
+
+### Debugging
+
+To get an interactive shell in the container:
+
+```bash
+docker run --rm -it linux-harden /bin/bash
+```
+
+### Notes
+
+-   The Docker image is based on Debian Slim
+-   Installs necessary dependencies for the script
+-   Provides an isolated environment for testing the script
+
 ## FAQ
+
 Q - Is the script idempotent?
 
 Ans - NO.
-> __Idempotency__
-> 
->    An operation is _idempotent_ if the result of performing it once is exactly the same as the result of performing it repeatedly without any intervening actions.
+
+> **Idempotency**
+>
+> An operation is _idempotent_ if the result of performing it once is exactly the same as the result of performing it repeatedly without any intervening actions.
 
 Q - Why is it not idempotent?
 
-Ans - We take backup of the file which stays on your server after operations. After taking back up of the file - __script sometimes comments out older configuration__. This is specifically true for [Step 4](https://github.com/pratiktri/init-li-harden#4-optionally-reset-the-url--for-apt-repo-from-vps-provided-cdn-to-os-provided-ones "Goto details of the step") where we comment out older configurations and append new ones to the end of the file. Also, for the SSH configuration file (/etc/ssh/sshd_conf) where we comment out the line of configuration and add the new configuration below the commented out line. So, if we re-run the script multiple times, those changes would compound as listed below. 
+Ans - We take backup of the file which stays on your server after operations. After taking back up of the file - **script sometimes comments out older configuration**. This is specifically true for [Step 4](https://github.com/pratiktri/init-li-harden#4-optionally-reset-the-url--for-apt-repo-from-vps-provided-cdn-to-os-provided-ones "Goto details of the step") where we comment out older configurations and append new ones to the end of the file. Also, for the SSH configuration file (/etc/ssh/sshd_conf) where we comment out the line of configuration and add the new configuration below the commented out line. So, if we re-run the script multiple times, those changes would compound as listed below.
 
- 1. Multiple backup files of _sources.list_ in _/etc/apt/_ directory. eg - _sources.list.13_02_2019-01_21_07_bak_ for each execution.
- 2. Many commented out lines on _/etc/apt/sources.list_ file.
- 3. Multiple backup files of ALL (.list) files under _/etc/apt/sources.d/_ directory.
- 4. Many commented out lines on ALL (.list) files under _/etc/apt/sources.d/_ directory.
- 5. If softwares would be installed or updated _sudo_, _curl_, _screen_, _ufw_, _fail2ban_.
- 6. *One* backup of _/etc/fail2ban/jail.conf_ file.
- 7. Multiple backups of _/etc/fail2ban/jail.local_ file
- 8. Multiple backups of _/etc/fail2ban/jail.d/defaults-debian.conf_ file
- 9. Multiple backups of _sshd_config_ file in _/etc/sshd/_ directory
+1.  Multiple backup files of _sources.list_ in _/etc/apt/_ directory. eg - _sources.list.13_02_2019-01_21_07_bak_ for each execution.
+2.  Many commented out lines on _/etc/apt/sources.list_ file.
+3.  Multiple backup files of ALL (.list) files under _/etc/apt/sources.d/_ directory.
+4.  Many commented out lines on ALL (.list) files under _/etc/apt/sources.d/_ directory.
+5.  If softwares would be installed or updated _sudo_, _curl_, _screen_, _ufw_, _fail2ban_.
+6.  _One_ backup of _/etc/fail2ban/jail.conf_ file.
+7.  Multiple backups of _/etc/fail2ban/jail.local_ file
+8.  Multiple backups of _/etc/fail2ban/jail.d/defaults-debian.conf_ file
+9.  Multiple backups of _sshd_config_ file in _/etc/sshd/_ directory
 
 Q - What would happen if I rerun the script multiple times?
-Ans - 
- * A new user would be created per execution
- * __All__ changes you have made to _/etc/apt/* /*.list_ files will be __overwritten__.
- * __All__ changes to _/etc/fail2ban/jail.conf_ file would be skipped (file __would NOT be read__ by fail2ban anymore).
- * Following configuration changes to _/etc/fail2ban/jail.local_ will be __overwitten__:- 
+Ans -
+
+-   A new user would be created per execution
+-   **All** changes you have made to _/etc/apt/* /*.list_ files will be **overwritten**.
+-   **All** changes to _/etc/fail2ban/jail.conf_ file would be skipped (file **would NOT be read** by fail2ban anymore).
+-   Following configuration changes to _/etc/fail2ban/jail.local_ will be **overwitten**:-
     1. [DEFAULT] bantime
     2. [DEFAULT] backend
     3. [DEFAULT] ignoreip
- * __All__ changes to _/etc/fail2ban/jail.d/defaults-debian.conf_ will be __overwritten__.
- * Following changes to _/etc/sshd/sshd_config_ file would be overwritten
+-   **All** changes to _/etc/fail2ban/jail.d/defaults-debian.conf_ will be **overwritten**.
+-   Following changes to _/etc/sshd/sshd_config_ file would be overwritten
     1. PermitRootLogin
     2. PasswordAuthentication
     3. AuthorizedKeysFile
@@ -396,21 +447,22 @@ Ans -
 Q - What are the files that the script creates or edits?
 
 Ans - Following is the list (in order of execution):-
+
 1. New - /home/[_new-username_]/.ssh/[_new-username_].pem
 2. New - /home/[_new-username_]/.ssh/[_new-username_].pem.pub
 3. New - /home/[_new-username_]/.ssh/authorized_keys
-4. New - /etc/apt/sources.list.[_execution-timestamp_]_bkp
+4. New - /etc/apt/sources.list.[_execution-timestamp_]\_bkp
 5. Edit - /etc/apt/sources.list
-6. New - /etc/apt/sources.d/[anydotlistfile._list_].[_execution-timestamp_]_bkp
+6. New - /etc/apt/sources.d/[anydotlistfile._list_].[_execution-timestamp_]\_bkp
 7. Edit - /etc/apt/sources.d/[anydotlistfile._list_]
-8. New if it __does not__ exist - _/etc/fail2ban/jail.local_
-9. New - /etc/fail2ban/jail.conf.[_execution-timestamp_]_bkp
-10. New if _/etc/fail2ban/jail.local_ __exists__ - _/etc/fail2ban/jail.local.[_execution-timestamp_]_bkp_
+8. New if it **does not** exist - _/etc/fail2ban/jail.local_
+9. New - /etc/fail2ban/jail.conf.[_execution-timestamp_]\_bkp
+10. New if _/etc/fail2ban/jail.local_ **exists** - _/etc/fail2ban/jail.local.[\_execution-timestamp_]_bkp_
 11. Edit - _/etc/fail2ban/jail.local_
-12. New - _/etc/fail2ban/jail.d/defaults-debian.conf[_execution-timestamp_]_bkp_
+12. New - _/etc/fail2ban/jail.d/defaults-debian.conf[\_execution-timestamp_]_bkp_
 13. Edit - _/etc/fail2ban/jail.d/defaults-debian.conf_
-14. New if __does not__ exist - /etc/cron.daily/linux_init_harden_apt_update.sh
-15. New - _/etc/ssh/sshd_config[_execution-timestamp_]_bkp_
+14. New if **does not** exist - /etc/cron.daily/linux_init_harden_apt_update.sh
+15. New - _/etc/ssh/sshd_config[\_execution-timestamp_]_bkp_
 16. Edit - _/etc/ssh/sshd_config_
 
 Q - Why comment out entire files in /etc/apt/ instead of just deleting them and creating new ones with required configurations?
@@ -420,9 +472,10 @@ Ans - If there was error creating backup files, you would have no way to restore
 Q - Can I execute it as a non-root user?
 
 Ans - User belongs to "sudo" group => Yes
-      User does not belong to "sudo" group => No
+User does not belong to "sudo" group => No
 
 Run the script with "sudo" privileges:-
+
 ```console
 root@host:~# wget -q https://sot.li/hardensh -O init-linux-harden.sh && sudo bash ./init-linux-harden.sh --username someusername --resetrootpwd --defaultsourcelist --quiet --hide-credentials
 
@@ -432,27 +485,28 @@ root@host:~# wget -q https://sot.li/hardensh -O init-linux-harden.sh && sudo bas
 ## Todo
 
 ### Bug fixes
-- [ ] fail2ban on Ubuntu 14.04 => need apply default-debian.conf to jail.local itself.
-- [ ] Exception handle - when curl https://ipinfo.io/ip fails
+
+-   [ ] fail2ban on Ubuntu 14.04 => need apply default-debian.conf to jail.local itself.
+-   [ ] Exception handle - when curl https://ipinfo.io/ip fails
 
 ### Roadmap
-- [ ] Update README - Assumptions - TOFU, Trust on VPS provider
-- [ ] New - Enable LUKS (is it even worth it???)
-- [ ] New - DNSCrypt
 
+-   [ ] Update README - Assumptions - TOFU, Trust on VPS provider
+-   [ ] New - Enable LUKS (is it even worth it???)
+-   [ ] New - DNSCrypt
 
 ## License
 
 Copyright 2019 Pratik Kumar Tripathy
 
-   Licensed under the Apache License, Version 2.0 (the "License");
-   you may not use this file except in compliance with the License.
-   You may obtain a copy of the License at
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
 
        http://www.apache.org/licenses/LICENSE-2.0
 
-   Unless required by applicable law or agreed to in writing, software
-   distributed under the License is distributed on an "AS IS" BASIS,
-   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-   See the License for the specific language governing permissions and
-   limitations under the License.
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.